Home Support Training Self-paced Training

Online, at your own pace

  1. View Training Videos – any time at no charge
    The Training Videos are designed to teach you the basics of the RMC75, RMC150, and RMC200 motion controllers. Requires contact information only.
  2. Access remote computer connected to an RMC for exercises
    Schedule one week of time on a remote PC at Delta connected to an RMC controller, and receive a training exercises packet to use together with the videos. See pricing below.
    A Delta instructor will assist you in connecting to a computer running at Delta on which you will run RMCTools software and connect to an RMC motion controller. You will have access to the remote PC and motion controller from Monday 12:00 noon to Sunday 12:00 Midnight (Pacific Time, UTC-8), and can contact the Delta instructor during that time if you need assistance.

Training Videos

To view the training videos, you will be asked (only once) for basic contact information.

View Videos

Sign Up for Self-Paced Training

Sign up to reserve time on a remote PC at Delta connected to an RMC controller, and to receive exercises for use with the self-paced videos. To just view the videos, you do not need to sign up.

  1. Access for a week is available from Monday 12:00 noon to Sunday 12:00 Midnight (Pacific Time, UTC-8).
  2. Register to sign up for self-paced training and provide credit card payment.

Price: $199 for one week

Self-Paced Training Details

Exercises Packet

The exercises packet includes the following exercises:

  • Basic Motion
  • Plots
  • Discrete I/O
  • Running User Programs
  • Creating User Programs
  • Program Triggers
  • Expressions
  • Curves
  • Pressure/Force Control
  • Troubleshooting

Connection to Remote PC with RMC

You will remotely connect to a computer located at Delta. A Delta trainer will assist you in setting up the connection. You will have access for one week, beginning on Monday at noon Pacific time.

The remote computer is pre-loaded with the RMCTools software. An RMC75E motion controller is connected to the computer via USB. If you need to learn the RMC150 or RMC200, don’t worry – learning on the RMC75 is virtually the same as the RMC150 or RCM200.

If you encounter problems during the self-paced training, you may contact the Delta instructor for assistance.

A high-speed internet connection is required.