RMC150 Register Map - File 45 Comm Configuration

RMC150 Registers, File 45: Communication Configuration

AB DF1,CSP Address	Modbus TCP,RTU Address	FINS Address	External Data Type	Internal IEC Address	Internal Data Type	Access	Register Name
F45:0-3	23041- 23047	D23040-D23046	-	%MD45.0-3	-	-	Reserved
F45:4	23049	D23048	REAL	%MD45.4	DINT	Read/Write	PROFIBUS: Station Address Indicates the current PROFIBUS station address for this controller. Valid values are 1 to 126. The default is 126, which is reserved for unaddressed PROFIBUS devices. NOTE: Only RMC150E controllers with the PROFIBUS communication module installed have this register.
F45:5	23051	D23050	REAL	%MD45.5	DINT	Read/Write	PROFIBUS: Lock Address 0=unlocked, 1=locked This register controls whether the PROFIBUS Station Address can be changed over PROFIBUS by a Class 2 master. Notice that RMCTools can always change the station address, regardless of the value of this register. Also, setting the station address over RMCTools will set this register to zero (0). NOTE: Only RMC150E controllers with the PROFIBUS communication module installed have this register.
F45:6	23053	D23052	DWORD	%MD45.6	DWORD	Read Only	PROFIBUS Connection Status
F45:7	23055	D23054	DINT	%MD45.7	-	-	Reserved
F45:8	23057	D23056	DWORD	%MD45.8	DWORD	Read Only	MAC Address (bytes 0-3) big Endian, (for 00-50-A0-B1-23-45, this would be 0x0050A0B1)
F45:9	23059	D23058	DWORD	%MD45.9	DWORD	Read Only	MAC Address (bytes 4-5) big Endian, in upper 16 bits (for 00-50-A0-B1-23-45, this would be 0x23450000)
F45:10	23061	D23060	DWORD	%MD45.10	DWORD	Read Only	Ethernet Status Bits
F45:11	23063	D23062	DWORD	%MD45.11	DWORD	Read/Write	Ethernet Configuration Bits
F45:12	23065	D23064	DWORD	%MD45.12	DWORD	Read/Write	IP Address
F45:13	23067	D23066	DWORD	%MD45.13	DWORD	Read/Write	Subnet Mask (0=use standard network masks)
F45:14	23069	D23068	DWORD	%MD45.14	DWORD	Read/Write	Default Gateway (0=none)
F45:15	23071	D23070	DWORD	%MD45.15	DWORD	Read Only	DHCP (or BOOTP) server IP Address
F45:16	23073	D23072	DINT	%MD45.16	DINT	Read Only	DHCP Lease Start (seconds since powerup)
F45:17	23075	D23074	DINT	%MD45.17	DINT	Read Only	DHCP Lease End (seconds since powerup)
F45:18	23077	D23076	DINT	%MD21.18	DINT	Read/Write	EtherNet/IP Class 1 TTL (time-to-live)
F45:19	23079	D23078	DINT	%MD245.19	DINT	Read/Write	EtherNet/IP Class 1 Start of Multicast Address Block
F45:20	23081	D23080	DINT	%MD45.20	DINT	Read/Write	EtherNet/IP Class 1 Size of Multicast Address Block
F45:21	23083	D23082	DWORD	%MD45.21	DWORD	Read/Write	Ethernet Outgoing Cyclic I/O Data Source
F45:22	23085	D23084	DWORD	%MD45.22	DWORD	Read/Write	Ethernet Incoming Cyclic I/O Data Destination
F45:23	23087	D23086	DWORD	%MD45.23	DWORD	Read Only	I/O Connection Status
F45:24	23089	D23088	DINT	%MD45.24	DINT	Read Only	I/O Connection PLC State
F45:25	23091	D23090	DINT	%MD45.25	DINT	Read/Write	Ethernet App Flags Bits 0-3 - I/O Data Mode 0=Use a Sync Register 1=Do not use a Sync Register Applies to both EtherNet/IP and PROFINET. Bits 4 - 5 - PROFINET Byte Order 0=MSB first 1=LSB first Applies to PROFINET.
F45:26-55	23093- 23151	D23092- D23150	-	%MD45.26-55	-	-	Reserved
F45:56-115	23153- 23271	D23152- D23270	DWORD	%MD45.56-115	DWORD	Read/Write	PROFINET Device Name Each register in this range holds four characters of the PROFINET device name.
F45:116	23273	D23272	DWORD	%MD45.116	DWORD	Read/Write	PROFINET Custom Data Record 1000 Address
F45:117	23275	D23274	DWORD	%MD45.117	DWORD	Read/Write	PROFINET Custom Data Record 1001 Address
F45:118	23277	D23276	DWORD	%MD45.118	DWORD	Read/Write	PROFINET Custom Data Record 1002 Address
F45:119	23279	D23278	DWORD	%MD45.119	DWORD	Read/Write	PROFINET Custom Data Record 1003 Address