RMCWin can keep track of several RMCs. The following pieces of information are associated with each RMC:
RMC name (the filename)
Names of each axis
Parameters of each axis (configuration word, scale, offset, etc.)
Command fields for each axis, except the Command itself (Mode through Command Value).
Plot times for each axis.
Hardware configuration of the RMC. This includes:
List of the physical modules included (e.g. PROFIBUS-DP, RMC100 CPU, two MDTs).
List of options for these modules. This includes all settings modified through the RMC Configuration dialog box (e.g. PROFIBUS station address, MDT blanking periods, number of SSI data bits, analog board channel assignments).
Communication path
A board file (.bd1) stores all of the above with the exception of the communication path, which is remembered for the board file in Windows’ internal Registry. Therefore, different computers can store different communication paths for the same board file.
See the following related topics:
Copyright (c) 1997-2015 by Delta Computer Systems, Inc.