Tip:
For more details on RUN, PROGRAM, and Disabled Mode, see the Run/Program/Disabled
Mode topic.
To change the RUN/PROGRAM/Disabled mode in RMCTools, use the Run/Program/Disabled icons in the Standard Toolbar:
Select the desired controller in the Project pane, then, on the toolbar, click the Controller button and choose the desired mode. The toolbar controller indicator shows the current mode of the controller:
|
Online and the controller is in PROGRAM Mode. |
|
Online the controller is in RUN Mode. |
|
Online the controller is in the Disabled state (RMC200 Only) |
See Also
Standard Toolbar | RUN/PROGRAM Mode
Copyright © 2024 Delta Computer Systems, Inc. dba Delta Motion