Controlling analog position, pressure, or force requires an analog module with drive outputs; therefore, only the 16-bit modules can be used. Controlling pressure or force requires the pressure-control firmware option.
For controlling solely pressure or force, see the Controlling Solely Pressure or Force topic.
For position-pressure control, see the Position-Pressure Overview topic.
For details on configuring the module for your control and transducer type, refer to Using Analog Channels as Position Inputs, Using Analog Channels as Pressure Inputs, Using Analog Channels as Differential Force Inputs, and Configuring the Analog Transducer Type.
Analog Input Ranges
See the COUNTS topic for detailed information on the maximum and minimum limits of the various analog input ranges.
See also:
Analog Transducer Configuration
Using Analog Channels as Position Inputs
Using Analog Channels as Pressure Inputs
Using Analog Channels as Differential Force Inputs
Using Position and Velocity Joysticks
Controlling Speed from a Tachometer Feedback
Transitioning from Position to Auxiliary Pressure/Force Control
Copyright (c) 1997-2015 by Delta Computer Systems, Inc.