Analog Transducer Specifications

Inputs

Four 16-bit differential

Isolation

750VDC

Overvoltage Protection

40V

Input Ranges

+10V, ±10V, +5V, ±5V, and
4-20mA (each channel is independently configured using RMCWin)

Input impedance

1MW

Input filter slew rate

25V/ms

Conversion Rate

122ms on 1ms loop modules; 244ms on 2ms loop modules (8 times oversampling)

Offset drift with temperature

0.2 LSB/°C typical (+10V range)

Gain drift with temperature

20ppm/°C typical (+10V range)

Non-linearity

12 LSB (counts) typical (+10V range)

Exciter Output

10VDC ±2%, 8mA
generated from A-D reference

Part # Designation

-Hx

Inputs

Four 12-bit differential

Offset Drift with Temperature

0.01 LSB/°C typical (+10V range)

Non-linearity

1 LSB (count) typical

Part # Designation

-Ax

Range

±10 V @ 5 mA (2 kW or greater load)

(For current drive, use the VC2100 accessory:
±10 mA to ±200 mA in 10 mA steps)

Tolerance

At 10 V: +200 mV, -100 mV
At 0 V: ±50 mV
At -10 V: +100 mV, -200 mV

Resolution

12 bits

Output isolation

750 VDC, optically isolated

Overload protection

One-second short-circuit duration

Overvoltage protection

Outputs are protected by clamp diodes