PS4D Power Supply (RMC200)

24 VDC, 35-Watt Power Supply

The PS4D power supply accepts 24 VDC power and provides power to the RMC200 Standard bases. The PS4D supports the B5, B7, and B11 Standard bases. Notice that the B15 base requires the PS6D power supply. The RMC200 Lite bases do not require a power supply module, since the CPU20L Lite has an integrated power supply.

Features

Handles the B5, B7 or B11 bases
Voltage over- and under-range LEDs.
Unpluggable terminal block

Part Number

The part number of the PS4D module is R200-PS4D.

Ferrite for Conducted Emissions Compliance

A ferrite ring is required on the power wires for Conducted Emissions compliance. Recommended ferrite is Fair-Rite 0431167281.

Fusing

Fusing is not required for protecting the PS4D. The PS4D has an internal, non-user-accessible, fast-acting 5 A fuse. If an external fuse is installed, it should be a fast-acting fuse less than 5 A, such as 4 A. Fusing may also optionally be installed to protect the wiring.

Specifications

General
Weight	463 g + 6 g (power connector)
Power
Input Power	42 W max (1.8A at 24Vdc)
Input Voltage	Recommended 24Vdc ± 15% (20.4 – 27.6 V), 30 V max. Overvoltage shutdown at 36 V.
Output Power	35 W
Functional Isolation	500 VAC
LEDs
Vin	Input voltage level indicator: Green: Normal range (20.4 – 27.6 Vdc) Orange: Voltage high or low, still operating Steady Red: Under- or over-voltage (outside of 18 – 36 V), or reverse voltage, not operating
On	Output power indicator: Off: Not providing power to base Green: Providing power to base
Flt	Faults indicator: Orange: Temperature high or power draw high, still operating Flashing Red: Under- or over-voltage, over power, or over temperature, output shut down Flashing Green/Red: Module not plugged into base, output shut down