Using Mitsubishi PLCs with the RMC

Q-Series

The RMC can communicate with the Mitsubishi Q-series PLC in the following ways:

Q and L-Series Built-in Ethernet:
Delta has created function blocks for communicating with the RMC via the built-in Ethernet port of Q and L-series PLCs. See https://deltamotion.com/company/alliances/alliance_mitsubishi.php for details.
QJ71E71-100 module (Ethernet)
Using the Procedure Exist control method. See the Mitsubishi Procedure Exist topic for details. A sample PLC project is available on the downloads page of Delta's website.
QJ71MT91 module (Ethernet Modbus/TCP).
Using the Modbus/TCP protocol. A sample PLC project is available on the downloads page of Delta's website. The download includes a document explaining how to set up and use the QJ71MT91.
QJ71C24N module (Serial RS-232/485)
Supported by the RMC75S only, using the Bidirectional protocol. See the Mitsubishi Bidirectional Protocol topic for details. A sample PLC project is available on the downloads page of Delta's website.

FX3U

The RMC can communicate with the Mitsubishi FX3U PLC in the following ways:

Ethernet(RMC75E or RMC150E):
Using the Procedure Exist control method. See the Mitsubishi Procedure Exist topic for details.