|
Firmware Limitations: |
RMC200: 1.10.0 or newer |
See the Commands Overview topic for basic command information and how to issue commands from PLCs, HMIs, etc.
Command Parameters
None.
Description
This command saves the controller image to the RMC200 SD card. The controller image will be saved on the SD card as a file named ControllerImage.bin in the root folder.
The Event Log will indicate that the controller image was saved to the SD card, or will provide an error message if it failed.
The Controller Image Command State register can be used to monitor the status of the save operation.
See Also
Controller Image Upload/Download | Restore Controller Image (121) | Controller Image Command State
Copyright © 2024 Delta Computer Systems, Inc. dba Delta Motion