Command: Disarm Event Timer (106)

Supported Axes:

All

Firmware Limitations:

RMC75/150: n/a

RMC200 CPU: 1.06.0 and newer

RMC200 D24: 1.04A and newer

See the Commands Overview topic for basic command information and how to issue commands from PLCs, HMIs, etc.

Command Parameters

Parameter Description

Range

Module Slot

The number of the slot that contains the module with the high-speed input to be used for event timing.

The first I/O module slot number on the RMC200 is slot 2.

A valid integer slot number from 2 to the maximum number of slots in the base.

Event Timer
The event timer number on the module. This is the internal software resource for the timer. See Event Timers for details.

D24: 0-3

Description

This command disarms a previously armed Event Timer. See Event Timers for details.