See the Commands Overview topic for basic command information and how to issue commands from PLCs, HMIs, etc.
Command Parameters
|
# |
Parameter Description |
Data Type |
Range |
|
1 |
Curve ID |
Internal: DINT External: REAL |
0-50000 |
|
2 |
Curve Count |
Internal: DINT External: REAL |
>0 |
Description
This command deletes curves with IDs in the range of Curve ID to Curve ID + Curve Count -1 will de deleted. Only curves that exist are deleted. An entry will be logged in the Event Log for each curve that is deleted. Attempting to delete non-existent curves will not cause an error.
After a curve is deleted, it cannot be used anymore and the space it occupied in the curve store is freed up. If a curve is deleted while it is being followed, it will not be interrupted and will continue to work properly, but cannot be used again after the curve completes.
See Also
Curve Delete All (85) | Curve Delete Except (84) | Curve Add (82) | Curves Overview
Copyright © 2024 Delta Computer Systems, Inc. dba Delta Motion