A plot detail window is opened by default when a plot is read into RMCWin. This window has a title of Data at 0.000 s with the actual number changing depending on the hairline position. The hairline is a vertical line that can be moved using the arrow keys, page up and down keys, and by using the left mouse button. The data values displayed in the detail window represent the plot at the hairline position. Therefore, to read exact values at a position in the plot, move the hairline to the desired position on the plot and read the detail window data.
To hide the Detail Window, use one of the following:
On the Data menu, click Hide Detail Window.
Click the Close button of the Detail window.
To show the Detail Window after it has been hidden:
On the Data menu, click Show Detail Window.
To display the individual bits on the Status word, do one of the following:
Click on the body of the detail window. This toggles the detail window between displaying the Status word as a hexadecimal number and as the bit names. When displayed as bit names, the names of the off bits are displayed in dark gray, while the names of the on bits are displayed black for non-errors, and red for errors.
On the Data menu, click Display plot status bits.
Press CTRL+B while the plot status window is displayed. This will toggle the detail status bits.
To move the Detail Window, do one of the following:
Drag the detail window by its title bar.
On the Data menu, click Move detail window. Each time this command is clicked, the detail window will move to the next corner of the plot window.
Press the TAB key, which executes the Move detail window command.
Copyright (c) 1997-2015 by Delta Computer Systems, Inc.