The two LEDs above the Drive connector on the RMC’s Resolver interface card are axis status LEDs. These LEDs will reflect the operational status of their corresponding axis according to the following table.
|
LED Action |
Axis Status |
|
Continuous Red |
No Transducer |
|
Alternating Red/Green |
The above error has not occurred, and one or more of the below errors have occurred and are enabled in the Auto Stop: Overdrive Error Parameter Error Position Overflow Integrator Windup Following Error |
|
Continuous Green |
Status good. None of the above are true. |
See also:
Copyright (c) 1997-2015 by Delta Computer Systems, Inc.