There is a limit to the number of points that can be downloaded to any given axis. This limit is on the total number of points for all segments on the axis. It does not include segments that have been deleted after they have been executed. If you receive this error, the problem is most likely that you have a spline segment already downloaded to this axis that fills up the rest of the spline buffer.
The point limits depend on the number of spline-capable axes in the RMC. All axes and channels listed by RMCWin as a separate column are spline-capable axes except auxiliary pressure or differential force channels.
The following chart lists the number of points allowed on a given axis depending on the number of spline-capable axes:
|
Axes |
Point Limit |
|
2 |
1023 |
|
3-4 |
511 |
|
5-8 |
255 |
Copyright (c) 1997-2015 by Delta Computer Systems, Inc.