The RMC75P CPU module contains a connector for power, and two connectors for communications.
Wiring Power
The connector screws and wire clamp screws must be tightened to max 7 b-in (0.8Nm).
Wiring the Communications
RS-232 Monitor Port
For wiring the RS-232 Monitor Port, see the RS-232 Wiring for the RMC75 topic.
9-Pin PROFIBUS-DP Connector
This connector is the standard PROFIBUS connector. It is used for connecting the RMC75 to other PROFIBUS-DP devices via a standard PROFIBUS-DP cable. The pin assignment is defined by the PROFIBUS specification.
See Also
Copyright © 2024 Delta Computer Systems, Inc. dba Delta Motion