RMC200 Registers, Files 24 and 25: Axis Definitions
The Axis Definitions are not intended to be directly accessed by the user. The preferred method of changing the axis definitions is to use the Axis Definitions dialog.
For highly advanced users, see the Axis Definition Registers topic for more details.
|
Internal IEC |
Register Name |
|
|
%MD24.0-511 |
DWORD |
Current Axis Definitions (Read-Only) |
|
%MD25.0-511 |
DWORD |
Requested Axis Definitions |
The Current Axis Definitions and the Requested Axis Definitions will generally be the same except in two cases:
(1) The user has written to the requested block and intends to do a warm restart or burn to flash and do a cold restart, or
(2) The requested axis definitions found on startup are invalid for the current hardware configuration; in this case the Current Axis Definitions will be the default for the current hardware configuration.
See Also
RMC200 Register Map | Modbus Addressing | DF1 Addressing | FINS Addressing
Copyright © 2024 Delta Computer Systems, Inc. dba Delta Motion