RMC200 Register Map - File 22 Plot Manager

RMC200 Registers, File 22: Plot Manager

This file contains the Plot Layout registers.

Internal IEC Address	Data Type	Access	Register Name
%MD22.0	DINT	Read/Write	Number of Plots Controls how many plots are active. Changing this value will cause the firmware to re-evaluate the layout of the plots to ensure that it has room for all the data in the plots. This may cause one or more plots to be reset. The default for this register is 8.
%MD22.1	DINT	Read Only	Maximum Plots This read-only value indicates how many plot templates can be defined at once. CPU20L: 48 CPU40: 64 (32 prior to firmware 1.14.0)
%MD22.2	DINT	Read Only	Maximum Data Sets per Plots This read-only value indicates the maximum number of data sets that be captured simultaneously by an individual plot. CPU20L: 48 CPU40: 128 (32 prior to firmware 1.14.0)
%MD22.3	DINT	Read Only	Maximum Samples per Loop Time This read-only value indicates the maximum number of total data set samples that are allowed per loop time across all plots. CPU20L: 512 CPU40: 1024
%MD22.4	DINT	Read Only	Plot Pool Size This read-only value indicates the size of the plot capture pool shared by all plots, in 32-bit values. CPU20L: 12x1024x1024 = 12,582,912 CPU40: 48x1024x1024 = 50,331,648 (12,582,912 prior to firmware 1.14.0)