General Module Properties Page

To access the General Module Properties page:
In the Project pane, expand the Modules folder, double-click the desired module and click General.

This page provides general information of the selected module.

Field	Description
Module	The name of the module.
Part Number	The part number of the module.
Description	A brief description of the module.
Hardware Revision	The hardware revision of the module.
Serial Number	The serial number of modules that report their serial number to RMCTools will be listed here.
Device MAC Address	For modules that support Ethernet, the primary (device) MAC address for the CPU will be listed here. This MAC address is used for all Ethernet communication except the LLDP protocol. See Ethernet MAC Address for details.
Port MAC Address(es)	For modules that support Ethernet, the port MAC address for each port on the module will be listed here. Port MAC addresses are used only for the LLDP protocol. See Ethernet MAC Address for details.
FPGA Image Rev	For modules with an updatable FPGA image, this page will include an Update FPGA Image button. If you need to update the FPGA image, first obtain the FPGA file from Delta, save it to your computer, then go online with the RMC and click the Update FPGA Image button on the General page of the modules properties.