Advanced RS-232 Properties Dialog

To access this dialog:
In the Project pane, double-click the module that contains the serial port and click Serial. Under Serial Port Settings, select the RS-232 Line Driver and click Advanced.

Use this dialog to configure advanced DF1 settings for the serial communications on the RMC75S. These settings must match the settings of the device you are communicating with via the serial port.

Data Length:	8 bits. This value cannot be changed.
Parity:	None, Odd, or Even.
Stop Bits:	1 or 2
Flow Control:	None or Hardware (RTS/CTS)