|
Supported Axes: |
All |
See the Commands Overview topic for basic command information and how to issue commands from PLCs, HMIs, etc.
Command Parameters
|
# |
Parameter Description |
Range |
|
1 |
Plot Number |
any valid plot number |
Description
This command stops a continuous plot capture immediately. This allows RMCTools to read up the entire plot without any gaps. Plots are either continuously capturing data or done capturing data. Compare this with the Start Plot (100) and Trigger Plot (102) commands.
To find out more about plotting, see the Using Plots topic.
See Also
Start Plot (100) Command | Plot Overview | Triggering Plots | List of Commands | Commands Overview
Copyright © 2024 Delta Computer Systems, Inc. dba Delta Motion