Curve Tool: Spreadsheet View Options

The Spreadsheet tab of the Options dialog box allows the user to customize the Spreadsheet view.

To view or change the spreadsheet options:

1. On the Tools menu, click Options.

2. Click the Spreadsheet tab.

3. Change any options on this page.

4. Click OK.

The Spreadsheet tab has the following sections:

• Location
  This section allows the user to show or hide the spreadsheet and to select the position of the spreadsheet. If the spreadsheet is not displayed, the position options are not available. To set the spreadsheet position check the Show Spreadsheet option.

• Column Widths
  This section allows the user to set the width of the columns on the spreadsheet. When the spreadsheet is displayed along the left or right side, it is in "vertical" mode and all four columns can be sized individually. When the spreadsheet is displayed along the top or bottom, the spreadsheet is in "horizontal" mode and all columns have the same width. The values in this section are displayed in inches. Click Set All To Default to set all column widths to the default values.

See Also: Curve Tool Topics

Copyright (c) 1997-2015 by Delta Computer Systems, Inc.