Resources

RMC70 MA Axis Module

MDT or SSI Inputs,
Analog Control Output (± 10V)

The MA1 and MA2 Axis modules generate ± 10V analog control outputs and interface to
position feedback transducers with the following characteristics:

The MA1 and MA2 Axis modules control one and two axes respectively. Each axis has a 16- bit, ±10V analog Control Output, an isolated 12-24VDC discrete Fault Input, and an isolated 12-24V SSR* Enable Output. Each axis may be independently configured for interface to either an MDT or SSI transducer.

MAx modules can be used for position control. To use the MAx modules for position–pressure or position–force control, the AP2 Expansion module is also required.

Supported Control Types

Current Control Output

If you need current Control Output instead of voltage Control Output (e.g. to drive a servo valve coil), use the VC2100 series voltage-to-current converters.

 

*SSR = Solid State Relay